How to Play the Picture Cube 3D Game

  • October 2, 2020

The first thing you will notice when you open the picture cube 3d is that it looks like a cube in 3 dimensions. You may even find it interesting that they have an “e” for “environment”. It also comes in different colors like black, blue, and white. You will find the cube has three small holes in the top that allow you to insert the cube’s card as well as the cubes two pieces and you can rotate them if you wish.

picture cube 3d

The inside of the cube also holds the cube’s parts and you can slide them out to access the cards. Most cubes are made up of some sort of plastic or cardboard, but you can buy cube with wood as well as other materials.

When you first place the card inside the cube, it may look somewhat jumbled or disorganized. However, once the card is in place, you should be able to figure out which part goes where. There are three types of pieces that go into the cube.

They consist of one card and two pieces. The two pieces are connected using glue. If you are not comfortable trying to glue the two pieces together, then you can use the built in system. Simply flip the cube over, pull the card out and slide the two pieces into place. Then slide the two pieces back into place.

Once you have all the pieces on the card, you can now start to assemble the cube. Use your two hands to hold the card and the pieces together. Then, you will want to align the piece with the card so that it is sitting straight.

You can start by putting the cube down on the table. Then, you will want to place the cube on the floor, but in an upright position. You can use a few blocks of wood on the bottom to make it more stable.

Once you have your cube on the flat surface, you will want to lay down the card over the cube. Then, place the two pieces on top of the card. You should line them up perfectly. You should also line them up on the sides of the card, but on the top as well. The corners should be slightly off center.

Put down your glue and slide the two pieces down. This should form the card. Then you should insert the card into place and make sure that it is in the proper place.

Slide the pieces down until they are centered. Use a pair of pliers to do this. Then, you will want to gently push the piece into the cube. It will take a few tries to get all of the pieces in the right place.

You will then want to make sure that you get the pieces all the way in. The last thing that you will want to do is try to glue the piece back into place. because it could cause it to pop out at any time.

Now that your cards and pieces are all in place, you can place the card on top of the cube. and gently pull it all the way down. on to form a neat looking cube. Now you are ready to place your picture in!

In order to get the best out of your picture cube, you will want to turn your cube over so that the card faces upward. This makes it easier to see what is inside.

Then, all you have to do is slide the pieces onto the card. This makes it much easier to get to all of the details.

Isaiah

E-mail : admin@c1buyonline.com

Submit A Comment

Must be fill required * marked fields.

:*
:*